TM 5-3895-385-23-2
0267
JOYSTICK REMOVAL, INSTALLATION, AND ADJUSTMENT
Joystick Removal
Figure 1. Joystick.
1. Remove platform control (WP 0262).
2. Disconnect joystick connector (Figure 1, Item 4) from Bituminous Material Paving Machine (BMPM) connector
(Figure 1, Item 3).
3. Remove eight bolts (Figure 1, Item 1) from joystick (Figure 1, Item 5).
4. Remove mounting plate (Figure 1, Item 2) from pedestal top (Figure 1, Item 6).
5. Remove joystick (Figure 1, Item 5) and rubber boot (Figure 1, Item 7) from pedestal top (Figure 1, Item 6).
END OF TASK
Joystick Installation
1. Install joystick (Figure 1, Item 5) and rubber boot (Figure 1, Item 7) into pedestal top (Figure 1, Item 6).
2. Install mounting plate (Figure 1, Item 2) onto pedestal top (Figure 1, Item 6).
3. Install eight bolts (Figure 1, Item 1) onto pedestal top (Figure 1, Item 6) and joystick (Figure 1, Item 5).
4. Connect joystick connector (Figure 1, Item 4) into BMPM connector (Figure 1, Item 3).
