TM 5-3895-385-23-2
0250
Screed Main Wear Plate Installation -- Continued.
Figure 9. Screed Electric Heater Box -- Connect.
NOTE
Route heater element harness as noted at removal
21. Route harness onto screed and behind crown motor.
22. Connect eight screed heater box connectors (Figure 9, Item 3) onto heater element connectors (Figure 9,
Item 2).
23. Slide dust boot (Figure 9, Item 1) over heater element connectors (Figure 9, Items 2 and 3).
END OF TASK
FOLLOW-ON TASK
1. Remove lifting device.
2. Install screed covers (WP 0249).
3. Install walkboard (WP 0234).
END OF TASK
END OF WORK PACKAGE
0250-13/14 blank
