TM 5-3895-385-23-2
0240
Screed Control Box Removal -- Continued.
Figure 4. Wires from Connector -- Removal.
5. Insert contact extraction tool into connector (Figure 4, Item 1), press down on locking tab (Figure 4, Item 2),
and remove wires (Figure 3, Items 5 and 8) from connector while pressing down on locking tab (Figure 4, Item
3).
6. Remove wire (Figure 3, Items 5 and 8) from rear grommets (Figure 3, Items 4 and 9).
7. Remove star nut (Figure 3, Item 6) from cable harness (Figure 3, Item 7).
8. Remove cable harness (Figure 3, Item 7) and wires (Figure 3, Items 5 and 8) from screed control box, being
careful not to damage wires.