TM 5-3895-385-23-1
0206
Table 1. Track Tension Loose Troubleshooting Procedures -- Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. Loss of hydraulic pressure.
1. Attach hydraulic pressure tester
(WP 0442, Vol 3) to track
tension hydraulic test port (WP
0449, Vol 3 Figure 5).
2. Start BMPM engine (TM 5-3895-
385-10).
3. Check hydraulic pressure (WP
1. If hydraulic pressure reads a
0442, Vol 3) at track tension
minimum of 300 pounds per
hydraulic test port (WP 0449, Vol
square inch (psi) (2068
3 Figure 5).
kiloPascals (kPa)), replace the
track tension hydraulic cylinder
(WP 0426, Vol 2).
2. If pressure reads below 300 psi
(2068 kPa), turn track tension
adjustment point (WP 0449, Vol
3 Figure 5) until 400 psi (2758
kPa) is achieved. If this does not
correct the problem, proceed to
END OF WORK PACKAGE
0206-2
