TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#168, FMI#16 ― ENGINE ELECTRONIC CONTROL MODULE (ECM) SUPPLY VOLTAGE ABOVE
MAXIMUM SYSTEM VOLTAGE LEVEL
INITIAL SETUP:
Test Equipment
References -- Continued
Battery analyzer (WP 0440, Vol 3, Item 7)
WP 0388, Vol 2
Multimeter (WP 0440, Vol 3, Items 36 and 37)
WP 0401, Vol 2
Personnel Required
WP 0443, Vol 3
91L
WP 0448, Vol 3
References
WP 0451, Vol 3
WP 0277, Vol 2
Equipment Conditions
WP 0332, Vol 2
Engine off (TM 5-3895-385-10)
WP 0350, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
WP 0357, Vol 2
Engine cool
TROUBLESHOOTING PROCEDURE
WARNING
Batteries give off combustible gas. Do not smoke or use open flame when working around or
near battery. Failure to comply may cause injury or death to personnel and damage to
equipment.
Battery acid can cause burns to unprotected skin. Wear safety goggles and chemical gloves
and avoid acid splash while working on the batteries. Failure to comply may cause injury or
death to personnel.
Do not damage batteries. Storage batteries are filled with a liquid acid that can leak from
sealed battery when case is broken. Contact with battery acid can burn skin and eyes. Wear
safety goggles and chemical gloves and avoid acid splash while handling damaged batteries.
Do not lift or move batteries by using terminals. Failure to comply may cause injury or death
to personnel or damage to equipment.
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.
