TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#108, FMI#2 -- ERRATIC BAROMETRIC PRESSURE AT ENGINE START
INITIAL SETUP:
Test Equipment
References -- Continued
Multimeter (0440, Vol 3, Item 37)
WP 0357, Vol 2
Personnel Required
WP 0443, Vol 3
91L
WP 0448, Vol 3
References
WP 0451, Vol 3
WP 0277, Vol 2
Equipment Conditions
WP 0332, Vol 2
Engine off (TM 5-3895-385-10)
WP 0333, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
WP 0334, Vol 2
TROUBLESHOOTING PROCEDURE
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.
NOTE
Some sensors share harness wiring. Malfunctions in certain sensors or in the engine ECM may
cause false errors to display because of this shared wiring. For this malfunction (SPN#108,
FMI#2), harness wiring is shared by the barometric pressure sensor, the engine oil pressure
switch, and the engine coolant temperature sensor.
Table 1. SPN#108, FMI#2 -- Erratic Barometric Pressure at Engine Start.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Multiple faults displayed.
1. Install fuse box (WP 0277, Vol
2).
2. Connect battery cables (WP
0357, Vol 2).
3. Turn keyless engine switch to
the AUX position (TM 5-3895-
385-10), but do not start
engine. Wait 30 seconds.
