TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#105, FMI#16 ― INTAKE MANIFOLD AIR TEMPERATURE ABOVE WARNING LIMIT
INITIAL SETUP:
Personnel Required
References -- Continued
91L
WP 0365, Vol 2
References
WP 0367, Vol 2
WP 0277, Vol 2
WP 0368, Vol 2
WP 0347, Vol 2
WP 0448, Vol 3
WP 0348, Vol 2
Equipment Conditions
WP 0349, Vol 2
Engine off (TM 5-3895-385-10)
WP 0357, Vol 2
Engine cool
WP 0361, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
WP 0364, Vol 2
TROUBLESHOOTING PROCEDURE
NOTE
Some sensors share harness wiring. Malfunctions in certain sensors or in the engine Electronic
Control Module (ECM) may cause false errors to display because of this shared wiring. For this
malfunction (SPN#999, FMI#99), harness wiring is shared by the intake manifold
pressure/temperature sensor, the camshaft position sensor, the water-in-fuel sensor, and the rail
fuel pressure sensor.
Table 1. SPN#105, FMI#16 ― Intake Manifold Air Temperature Above Warning Limit.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Battery-charging alternator belt
Check for broken battery-charging
1. If broken, replace battery-
is broken.
alternator belt (WP 0349, Vol 2).
charging alternator belt (WP
0349, Vol 2).
2. If not broken, proceed to next
malfunction.
2. Battery-charging alternator belt
Verify that tensioner arm stop is
1. If tensioner arm stop is in
is loose.
not in contact with the spring case
contact with the spring case
stop on the cooling fan belt
stop, replace battery-charging
tensioner (WP 0448, Vol 3, Figure
alternator belt (WP 0349, Vol
53).
2).
