TM 5-3895-385-23-1
FIELD MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#100, FMI#1 ― LOW OIL PRESSURE
INITIAL SETUP:
Personnel Required
References -- Continued
91L
WP 0341, Vol 2
References
WP 0342, Vol 2
WP 0277, Vol 2
WP 0348, Vol 2
WP 0323, Vol 2
WP 0357, Vol 2
WP 0324, Vol 2
WP 0443, Vol 3
WP 0332, Vol 2
WP 0448, Vol 3
WP 0333, Vol 2
WP 0451, Vol 3
WP 0334, Vol 2
Equipment Conditions
WP 0340, Vol 2
Engine off (TM 5-3895-385-10)
Engine hood assembly removed (WP 0433, Vol 2)
TROUBLESHOOTING PROCEDURES
CAUTION
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.
NOTE
Some sensors share harness wiring. Malfunctions in certain sensors or in the engine ECM may
cause false errors to display because of this shared wiring. For this malfunction (SPN#100,
FMI#1), harness wiring is shared by the engine oil pressure switch, the barometric pressure
sensor, and the engine coolant temperature sensor.
Table 1. SPN#100, FMI#1 ― Low Oil Pressure.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1. Low engine oil level.
Check engine oil level (TM 5-3895-
1. If oil level is correct, proceed to
385-10).
next malfunction.
2. Add engine oil as needed (TM
5-3895-385-10).
2. Oil line(s) leaking.
Inspect oil lines from turbocharger
1. If damaged or leaking, replace
for leaks or damage (WP 0347, Vol
turbocharger oil line(s) (WP
2).
0347, Vol 2).
