TM 5-3895-385-10
OPERATOR MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
CUTOFF SHOE REMOVAL AND INSTALLATION
INITIAL SETUP:
Equipment Conditions
Tools and Special Tools
Screed extensions fully extended (WP 0006)
9/16 inch combination wrench (WP 0031, Item 16)
Screed fully lowered (WP 0006)
9/16 socket (WP 0031, Item 10)
Cutoffs fully raised (WP 0006)
Socket wrench handle (WP 0031, Item 5)
Materials/Parts
Engine off (WP 0006)
Lock washer (8) (WP 0033, Item 18)
BATTERY DISCONNECT switch OFF (WP 0004)
Personnel Required
Time Required
12V (1)
0.5 hr
References
CUTOFF SHOES REMOVAL AND INSTALLATION
CAUTION
The Bituminous Material Paving Machine (BMPM) cutoffs cannot be lowered when the cutoff
shoes are installed. Failure to comply may cause damage to equipment.
NOTE
The BMPM is equipped with cutoff shoes that will enable the operator to pave an area that is
only 6 feet (ft) wide.
The procedure for installation and removal of the cutoff shoes is the same whether being
performed on the left side or right side. Left side shown.
0016-1
