TM 5-3895-385-10
0016
CUTOFF SHOES REMOVAL -- CONTINUED.
WARNING
Allow 30 minutes of cool down time before touching machine components. Failure to comply may
cause injury or death to personnel.
NOTE
Inner cutoff shoes are labeled as L (left) and R (right) by a stamp on the cutoff shoe (WP 0009).
Out cutoff shows are interchangeable.
1. Remove two bolts (Figure 1, Item 9), lock washers (Figure 1, Item 14), nuts (Figure 1, Item 13), and outer
cutoff shoe (Figure 1, Item 10) from BMPM (Figure 1, Item 1).
2. Remove two bolts (Figure 1, Item 3), lock washers (Figure 1, Item 11), nuts (Figure 1, Item 12), and inner
cutoff shoe (Figure 1, Item 2) along with cutoff shoe plate (Figure 1, Item 4) from BMPM (Figure 1, Item 1).
3. Remove three bolts (Figure 1, Item 5), flat washers (Figure 1, Item 6), lock washers (Figure 1, Item 7), nuts
(Figure 1, Item 8), and cutoff shoe plate (Figure 1, Item 4) from inner cutoff shoe (Figure 1, Item 2).
4. Install three bolts (Figure 1, Item 5), flat washers (Figure 1, Item 6), lock washers (Figure 1, Item 7), nuts
(Figure 1, Item 8) into inner cutoff shoe (Figure 1, Item 2) for storage.
5. Install two bolts (Figure 1, Item 3), lock washers (Figure 1, Item 11), and nuts (Figure 1, Item 12) into inner
cutoff shoe (Figure 1, Item 2) for storage.
6. Install two bolts (Figure 1, Item 9), lock washers (Figure 1, Item 14), and nuts (Figure 1, Item 13) into outer
cutoff shoe (Figure 1, Item 10) for storage.
7. Pack cutoff shoes (WP 0023).
END OF TASK
CUTOFF SHOES INSTALLATION
1. Unpack cutoff shoes (WP 0023).
2. Remove two bolts (Figure 1, Item 9), lock washers (Figure 1, Item 14), and nuts (Figure 1, Item 13) from outer
cutoff shoe (Figure 1, Item 10), and discard lock washers.
3. Remove three bolts (Figure 1, Item 5), flat washers (Figure 1, Item 6), lock washers (Figure 1, Item 7), nuts
(Figure 1, Item 8) from inner cutoff shoe (Figure 1, Item 2), and discard lock washers.
4. Remove two bolts (Figure 1, Item 3), lock washers (Figure 1, Item 11), and nuts (Figure 1, Item 12) from inner
cutoff shoe (Figure 1, Item 2), and discard lock washers.
