TM 5-3895-385-10
0015
BOLT-ON SCREED EXTENSION KIT INSTALLATION -- CONTINUED.
NOTE
Auger extensions and material retaining plate extensions are labeled L and R (WP 0009).
Pieces labeled L should be installed on the left side of the BMPM; pieces labeled R should be
installed on the right side of the BMPM.
The procedure for installation and removal of material retaining plate extensions is the same
whether being performed on the left side or right side. Left side shown.
18. Remove wing screw (Figure 6, Item 3) from BMPM (Figure 6, Item 2).
19. Install 4-ft bolt-on extension material retaining plate L or R (Figure 6, Item 1) into BMPM (Figure 6, Item 2)
with assistance.
20. Install wing screw (Figure 6, Item 3) onto BMPM (Figure 6, Item 2).
21. Remove wing screw (Figure 6, Item 4) from 4-ft bolt-on extension material retaining plate L or R (Figure 6,
Item 1).
22. Install 2-ft bolt-on extension material retaining plate L or R (Figure 6, Item 5) into 4-ft bolt-on extension
material retaining plate L or R (Figure 6, Item 1).
23. Install wing screw (Figure 6, Item 3) on 4-ft bolt-on extension material retaining plate L or R (Figure 6, Item 1).
END OF TASK
FOLLOW-ON TASK
Install end gates (WP 0014)
END OF TASK
END OF WORK PACKAGE
0015-13/14 blank