TM 5-3895-385-10
OPERATOR MAINTENANCE
BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
OPERATION UNDER USUAL CONDITIONS
INITIAL SETUP:
References
Tools and Special Tools
FM 4-25.11
15/16 in socket wrench socket (WP 0031, Item 11)
FM 21-60
15/16 inch combination wrench (WP 0031, Item 18)
Socket wrench handle (WP 0031, Item 5)
Personnel Required
12V (1)
Equipment Conditions
Before PMCS completed (WP 0013)
OPERATION UNDER USUAL CONDITIONS
WARNING
Operation and maintenance of the Bituminous Material Paving Machine (BMPM) contains
many possibilities for injury or death to personnel. Make sure to be familiar with general first
aid procedures as referenced in FM 4-25.11, First Aid. Failure to comply may cause injury or
death to personnel.
Operating the BMPM exposes personnel to a high noise level. While operating or working
within 37 feet (ft) (11 meters (m)) of a running BMPM wear hearing protection. Failure to
comply may cause hearing loss.
When running, BMPM engine has hot metal surfaces that will burn flesh on contact. Shut
down engine and allow sufficient cooling before checks, services, or maintenance. Wear
gloves and additional protective clothing as required. Failure to comply may cause injury or
death to personnel.
Exhaust discharge contains deadly gases, including carbon monoxide. Do not operate BMPM
in an enclosed area unless the exhaust discharge is properly vented. Failure to comply may
cause injury or death to personnel.
Be sure area surrounding BMPM is clear of personnel and objects before moving the unit,
opening hopper wings, lowering screed, or deploying screed extensions. Sound unit horn
before moving unit from stopped position. Turn on beacon when unit is in motion. Failure to
comply may cause injury or death to personnel or damage to equipment.