TM 5-3895-373-34
2.67
REPLACE MAIN SCREED FRAME - Continued.
D.
INSTALL - Continued.
6.
CONNECT SCREED BURNER MANIFOLD.
a.
Position screed burner manifold (71) onto main
screed frame.
b.
Install lockwashers (68) onto bolts (67).
WARNING
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Apply thread locking compound
(Item
14,
Appendix B) to bolts (65).
d.
Install screed burner manifold (71) using bolts
(67). Tighten to 9 lb-ft (12 N.m).
e.
Cut tie wraps, uncoil, and route main screed
burner hose (69) and extension screed burner
hose (70) through main screed frame.
f.
Apply electrical insulating compound to screed
harness electrical connectors (65).
g.
Connect screed burner solenoid valve electrical
connectors (64) to screed harness electrical
connectors (65).
WARNING
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
h.
Apply hydraulic fitting sealant to threads of
straight adapter on screed burner manifold (71)
being installed.
i.
Install hose (66) at screed burner manifold (71)
being installed.
GO TO NEXT PAGE
2-948
