TM 5-3895-373-34
D.
INSTALL - Continued.
2.
INSTALL SIDE PLATE.
a.
Install lockwashers (89) and flat washers (90)
onto hex head cap screws (88).
WARNING
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
b.
Apply thread locking compound
(Item
13,
Appendix B) to hex head cap screws (88).
c.
Install side plate (91) and secure with hex head
cap screws (88). Tighten cap screws to 37 lb-ft
(50 N.m).
3.
REMOVE
TIE
WRAPS
FROM
COILED
SCREED HARNESS AND INSTALL SCREED
HARNESS INTO MAIN SCREED FRAME.
ROUTE THROUGH SCREED.
GO TO NEXT PAGE
2-945
