TM 5-3895-373-34
D.
INSTALL - Continued.
g.
Route extension screed vibrator hoses (103
and 104) through conduit channel of extension
screed frame (112).
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
h.
Apply hydraulic fitting sealant to threads of
elbows (106). Install and tighten swivel elbows
(105) on elbows in direction shown.
i.
Apply hydraulic fitting sealant to threads of
swivel elbows (105).
Proper operation of screed vibrator
depends on correct rotation of
screed vibration motor. Hydraulic
flow to and from vibration motor
determines
direction
of
motor
rotation. Failure to connect hydraulic
hoses to correct ports and fittings
may result in faulty operation of
vibration system, and could result in
equipment damage.
j.
Install and tighten hoses (103 and 104) on
swivel elbows (105).
k.
Apply hydraulic fitting sealant to threads of
elbows (134 and 135).
I.
Install and tighten hoses (103 and 104) on
elbows (134 and 135).
GO TO NEXT PAGE
2-915
