TM 5-3895-373-34
2.66.
REPLACE EXTENSION SCREED FRAME - Continued
D.
INSTALL - Continued.
6.
INSTALL EXTENSION SCREED HYDRAULIC
LINES AND FITTINGS.
a.
Install elbows (106) through mating ports of
extension screed frame (112). Install and
tighten lock nuts (108) on elbows.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Apply hydraulic fitting sealant to threads of
elbows (106).
c.
Install and tighten hoses (102) on elbows
(106). Ensure that hose fitting tagged "front" is
installed on front elbow.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
d.
Install lockwashers (99) and flat washers (100)
on hex head cap screws (98). Apply thread
locking compound (Item 14, Appendix B) to
threads of cap screws.
e.
Secure clamps (101) to extension screed
frame (112) with hex head cap screws (98),
lockwashers (99), and flat washers (100).
Tighten cap screws to 9 lb-ft (12 N•m).
f.
Install tie wraps (97) as needed to secure
hoses
(102).
GO TO NEXT PAGE
2-914
