TM 5-3895-373-34
A.
REMOVE - Continued.
d.
Remove cotter pins (125), flat washers (126),
and clevis pins (127). Discard cotter pins.
e.
Remove vertical adjustment block assemblies
(128)
with
attached
components
from
extension screed base (82).
f.
Remove socket set screws (129) and height
adjustment indicator (130).
g.
Remove
hex
head
cap
screws
(131),
lockwashers (132), and cover plate (133).
Discard lockwashers.
14.
REMOVE
EXTENSION
SCREED
GUIDE
SUPPORT
ASSEMBLY
AND
SHAFTS
PER
PARAGRAPH 2.73, A.2.a through e and A.2.g and
h.
15.
REMOVE
EXTENSION
SCREED
VIBRATOR
COMPONENTS PER PARAGRAPH 2.75.
B.
CLEAN.
1.
CLEAN BOLT AND CAP SCREW THREADS.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a.
Clean threads of all bolts and cap screws with
thread locking compound solvent.
b.
Wipe bolt and cap screw threads dry with
cleaning cloth.
2.
USE CLEANING CLOTH TO WIPE RESIDUE
FROM THREADS OF ELBOWS.
GO TO NEXT PAGE
2-907
