TM 5-3895-373-34
A.
REMOVE - Continued.
10.
REMOVE EXTENSION SCREED.
a.
Using socket wrench set, remove upper three
hex head cap screws (94) and lockwashers
(95). Discard lockwashers.
b.
Using socket, hinged handle, and 6-inch and
12-inch extensions from socket wrench set,
remove lower three hex head cap screws (94)
and lockwashers (95). Discard lockwashers.
c.
Using hinged handle and socket from socket
wrench set, remove hex nut (2), lockwasher
(3), and flat washer (4). Discard lockwasher.
d.
Start paving machine and retract screed
extension
cylinder
piston
rod
(96)
from
extension screed (14). Refer to TM 5-3895-
373-10.
Extension screed weighs approximately
700 lbs (318 kg). Personnel shall stay
clear of objects being lifted during hoist
operations. Do not work on objects
suspended by a hoist. A swinging or
shifting load may cause injury or death
to personnel.
e.
Using sling straps and overhead lifting device,
evenly lift extension screed (14) and remove
from main screed (52).
f.
Lower extension screed (14) to floor, but keep
sling straps in place.
GO TO NEXT PAGE
2-903
