TM 5-3895-373-34
E.
INSTALL - Continued.
4.
INSTALL BOTTOM COVER PLATE AND REAR
COVER PLATE ON AUGER/CONVEYOR
DRIVE CHAIN HOUSING.
a.
Install flat washers (7) and square flat washers
(8) onto hex head cap screws (6).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
b.
Apply thread locking compound to threads of hex
head cap screws (6).
c.
Position bottom cover plate (9) on auger/
conveyor drive chain housing (5).
d.
Install bottom cover plate (9) using hex head cap
screws (6). Tighten hex head cap screws to 37
lb-ft (50 N.m).
e.
Install flat washers (2) and square flat washers
(3) onto hex head cap screws (1).
f.
Apply thread locking compound to threads of hex
head cap screws (1).
g.
Position rear cover plate (4) on auger/ conveyor
drive chain housing (5).
h.
Install rear cover plate (4) using hex head cap
screws (1). Tighten hex head cap screws to 37
lb-ft (50 N•m).
NOTE
FOLLOW-ON-TASKS: Steps installed per TM 5-3895-373-20.
Close rear top left access door per TM 5-3895-373-10.
Close rear top right access door per TM 5-3895-373-10.
END OF TASK
2-871
