TM 5-3895-373-342.63REPLACE AND ADJUST AUGER/CONVEYOR DRIVE CHAIN - Continued.B.CLEAN.1.CLEAN AUGER/CONVEYOR DRIVE CHAINAND COMPONENT PARTS.Cleaning solvent, P-D-680, is TOXIC andflammable. Wear protective goggles andgloves. Use only in a well ventilated area.Avoid contact with skin, eyes, and clothes,and do not breathe vapors. Keep away fromheat or flame. Never smoke when usingsolvent; the flashpoint for Type III cleaningsolvent is 200°F (93,3°C). Failure to do somay result in injury or death to personnel.If personnel become dizzy while usingcleaning solvent, immediately get fresh airand medical help. If solvent contacts skin orclothes, flush with cold water. If solventcontacts eyes, flush eyes with water and getimmediate medical attention.a.Soak auger/conveyor drive chain incleaning solvent. Use a cleaning brush toremove grease buildup. Dry theauger/conveyor drive chain with a cleaningcloth.b.Use a cleaning cloth soaked with cleaningsolvent to clean all cover plates.c.Use a parts cleaning brush and cleaningsolvent to remove any hard deposits.2.CLEAN CAP SCREWS.Thread locking compound solvent can causeeye damage. Wear safety goggles/glasseswhen using. Avoid contact with eyes. Ifsolvent contacts eyes, flush eyes with waterand get immediate medical attention.a.Clean threads of cap screws with threadlocking compound solvent.b.Dry with a clean, cleaning cloth.GO TO NEXT PAGE2-866
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
