TM 5-3895-373-34
2.56
REPLACE SCREED VIBRATION CONTROL VALVE - Continued
A.
REMOVE Continued.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to the
skin, eyes, and respiratory system.
Avoid
prolonged
exposure.
Eye
protection and rubber gloves must be
worn when working with hydraulic oil.
The screed vibration control valve is
held into position only by hydraulic
tubes. Hold the control valve securely in
place when loosening tube nuts to
prevent bending the hydraulic tubes.
c. Disconnect tube nuts at both ends of tubes (2 and 3)
and remove tubes.
Catch hydraulic
oil from tubes in machinery wiping towel.
d.
Disconnect tubes (4 and 5). Remove screed
vibration control valve (1).
e.
Plug tubes (2 and 3) and tubes (4 and 5) to
prevent contamination.
2.
REMOVE TEES AND ELBOWS FROM SCREED
VIBRATION CONTROL VALVE.
a.
Remove tees (6).
b.
Remove elbows (7).
GO TO NEXT PAGE
2-792
