TM 5-3895-373-34
2.56
REPLACE SCREED VIBRATION CONTROL VALVE.
This task covers:
a. Remove
b. Install
INITIAL SETUP
Tools:
General mechanic’s automotive tool kit
Reference:
(Item 106, Appendix E)
TM 5-3895-373-10
TM 5-3895-373-24P
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Equipment Condition:
Hydraulic fitting sealant (Item 26, Appendix B)
Rear top right access door open per TM 5-3895-373-10.
Machinery wiping towel (Item 37, Appendix B)
Pipe sealant (Item 27, Appendix B)
Protective caps (Item 3, Appendix B)
Thread locking compound (Item 14, Appendix B)
A.
REMOVE.
1. REMOVE SCREED VIBRATION CONTROL VALVE.
Thoroughly clean hydraulic hoses and
fittings before disconnecting. Always
plug or cap off disconnected fittings to
prevent
intrusion
of
contaminants.
Failure to properly clean and cap off
connectors
may
result
in
hydraulic
system contamination and equipment
damage.
a.
Wipe all dirt and dust from fittings at screed
vibration control valve (1) with cleaning cloths.
b.
Place machinery wiping towel under screed
vibration control valve (1).
GO TO NEXT PAGE
2-791
