TM 5-3895-373-34
D.
ASSEMBLE - Continued.
5.
INSTALL HYDRAULIC FITTINGS ON FLOW
DIVIDER.
a.
Install hydraulic fittings on tow point flow divider.
WARNING
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
flush
eyes
with
water
and
get
immediate medical attention.
(1)
Apply pipe sealant to one end of elbow
(14), male end of elbow (13), and to pipe
thread end of elbows (10 and 12).
(2)
Install elbows (14 and 13), with both
elbows pointing toward top of tow point
flow divider (I 1).
(3)
Install elbow (12), with elbow pointing
away from tow point flow divider (11) as
shown.
(4)
Install elbow (10), with elbow pointing
down approximately 450 toward base of
tow point flow divider (11).
b.
Install hydraulic fittings on valve and cylinder flow
divider.
(1)
Apply pipe sealant to pipe thread ends of
elbow (9), straight adapter (8), and tee (5).
(2)
Install elbow (9), with elbow pointing
toward top of valve and cylinder flow
divider (6).
(3)
Install straight adapter (8).
(4)
Install elbow (7) onto straight adapter
(8) pointing straight out to the side as
shown.
(5)
Install tee (5), with tee pointing toward top
of valve and cylinder flow divider (6).
(6)
Install tube reducer (4) onto tee (5).
GO TO NEXT PAGE
2-673
