TM 5-3895-373-34
A.
DISASSEMBLE - Continued.
3.
DISASSEMBLE
FLOW
ADJUSTMENT
ASSEMBLY.
a.
Remove stem (15) from plug (16).
CAUTION
Use caution when removing seals
and preformed packings. Scratched
or dented seal grooves can cause
bypass
leakage.
Do
not
use
excessive force when removing seals
and preformed packings. Use an o-
ring
tool
to
remove
seals
and
preformed packings.
b.
Use an o-ring tool to remove preformed packing
(17) from plug (16). Discard preformed packing.
c.
Use an o-ring tool to remove packing retainer
(18) and preformed packing (19). Discard
packing retainer and preformed packing.
4. REMOVE PREFORMED PACKINGS AND
PACKING RETAINERS FROM SLEEVE.
a.
Use an o-ring tool to remove preformed packing
(20), packing retainers (21 and 22), preformed
packing (23) and packing retainer (24) from
sleeve (14). Discard preformed packings and
packing retainers.
b.
Use an o-ring tool to remove
preformed
packings (25 and 26) and packing retainer (27).
Discard
preformed
packings
and
packing
retainer.
GO TO NEXT PAGE
2-677
