TM 5-3895-373-34
2.43
REPLACE/REPAIR AUXILIARY VIBRATION PUMP - Continued
E.
ASSEMBLE Continued.
t.
Use pliers to rotate long end of drive shaft
counterclockwise to check for proper shaft
rotation and oil flow from outlet port.
u.
Plug hydraulic ports with protective caps.
v.
Dispose
of
machinery
wiping
towel
in
accordance with local procedures.
4.
ASSEMBLE AUXILIARY VIBRATION PUMP AND
ADAPTER BODY.
a.
Coat o-ring (16) with petrolatum.
b.
Install o-ring (16) on rear face of auxiliary
vibration pump.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
c.
Place flat washers (14) onto socket head cap
screws (13) and apply thread locking compound
to threads of cap screws.
d.
Install adapter body (15) and secure with socket
head cap screws (13). Tighten cap screws.
F.
INSTALL.
1.
INSTALL AUXILIARY VIBRATION PUMP.
a.
Coat preformed packing (12) with petrolatum.
Install packing onto mating flange of auxiliary
vibration pump (9).
b.
Seat auxiliary vibration pump (9) onto propulsion
pump.
c.
Install flat washers (11) and socket head cap
screws (10) Tighten
GO TO NEXT PAGE
2-600
