TM 5-3895-373-34
2.43
REPLACE/REPAIR AUXILIARY VIBRATION PUMP.
This task covers:
a.
Removal
b.
Disassemble
c.
Clean
d.
Inspect
e.
Assemble
f.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 106, Appendix D)
TM 5-3895-373-24P
Bench vise (Item 112, Appendix D)
Combination wrench (Item 115, Appendix D)
Equipment Condition:
O-ring tool (Item 103, Appendix D)
Right access door open per TM 5-3895-373-10.
Pry bar (Item 9, Appendix D)
Right access cover removed per TM 5-3895-373-10.
Shaft seal driver tool (Item 19, Appendix C)
Front top right access door open per TM 5-3895-373-10.
Snap ring pliers (Item 66, Appendix D)
Hydraulic system evacuated per paragraph 2.54.
Torque wrench (Item 132, Appendix D)
Left auxiliary pump removed per paragraph 2.42.
Vise jaw caps (Item 23, Appendix D)
Materials/Parts:
Cleaning cloths (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Emery cloth (Item 5, Appendix B)
Hydraulic fitting sealant (Item 26, Appendix B)
Hydraulic oil (Item 21, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Machinery wiping towel (Item 37, Appendix B)
Petrolatum (Item 24, Appendix B)
Plastic bag (Item 1, Appendix B)
Protective caps (Item 3, Appendix B)
Tags (Item 34, Appendix B)
Thread locking compound (Item 14, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Tie wraps (Item 36, Appendix B)
O-ring
Preformed packings
Seal kit
GO TO NEXT PAGE
2-583
