TM 5-3895-373-34
E.
ASSEMBLE - Continued.
3.
INSTALL PREFORMED PACKINGS, KEY, AND
GEAR ASSEMBLIES.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to
the
skin,
eyes,
and
respiratory
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
hydraulic oil.
a. Lubricate preformed packing (38) with clean hydraulic
oil.
b. Install preformed packing (38) into adapter plate
assembly (22).
Matchmarks on drive gears and idler
gears
must
be
aligned
prior
to
assembly. Do not install reused
drive gears and idler gears
indiscriminately. Excessive pump
noise and rapid gear wear may result
from misaligned, reused, gears. Line
up matchmarks prior to assembly of
reused drive gears and idler gears.
c.
If reusing idler and drive gear assemblies (36
and 35) removed at disassembly, line up match
marks on mating idler gear (34) and drive gear
(33).
d.
Install idler gear assembly (36) and drive gear
assembly (35) through adapter plate assembly
(22).
e.
If reusing idler gear (34) and drive gear (33)
removed at disassembly, line up matchmarks on
idler gear and drive gear.
f.
Install key (37), idler gear (34), and drive gear
(33) on idler gear assembly (36) and drive gear
assembly (35).
GO TO NEXT PAGE
2-577
