TM 5-3895-373-34
B. INSTALL - Continued.
2.
INSTALL TRACK TENSIONING CYLINDER.
a.
Install track tensioning cylinder (4). Seat rear
end of track tensioning cylinder into square
recess in track frame (3).
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
skin
contact.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention.
b.
Apply hydraulic fitting sealant to threads of
elbow (6).
c.
Connect hose (5) end and tighten fitting.
3.
INSTALL TRACK IDLER ROLLER ASSEMBLY.
a.
Slide or pry track idler roller assembly (2) to the
rear to center track tensioning cylinder (4) end
into round hole in track idler shaft bracket.
b.
Remove cribbing (1).
NOTE
FOLLOW-ON-TASKS:
Install track chain assembly per paragraph 2.41.
Lower paving machine from jacks per TM 5-3895-373-20.
END OF TASK
2-517
