TM 5-3895-373-34
2.39.
REPLACE/REPAIR TRACK TENSIONING RELIEF VALVE AND UNLOADING VALVE.
This task covers:
a. Remove
b.
Disassemble
c.
Clean
d. Inspect
e.
Assemble
f.
Install
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-10
(Item 106, Appendix D)
TM 5-3895-373-24P
Bench vise (Item 112, Appendix D)
Gasoline blowtorch (Item 11, Appendix D)
Equipment Conditions:
O-ring tool (Item 103, Appendix D)
Center top right access door open per TM 5-3895-373-10.
Snap ring pliers (Item 66, Appendix D)
Right access door open per TM 5-3895-373-10.
Torque wrench (Item 132, Appendix D)
Materials/Parts:
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Culture swabs (Item 33, Appendix B)
Hydraulic fitting sealant (Item 26, Appendix B)
Hydraulic oil (Item 21, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Machinery wiping towel (Item 37, Appendix B)
Pipe sealant (Item 27, Appendix B)
Protective caps (Item 3, Appendix B)
Thread locking compound (Item 14, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Flat washer
Lockwashers
Preformed packing
Valve parts kits
Valve seat
GO TO NEXT PAGE
2-518
