TM 5-3895-373-34
B.
DISASSEMBLE - Continued.
d.
Measure the exposed threads on adjusting
screw (22). This is measurement A. This
measurement
will
be
needed
during
reassembly.
Adjusting screw is spring loaded and
may be released when removed. Place
a cleaning cloth over screw to catch
screw and spring. Failure to do so may
result in damage to screw and loss of
spring.
e.
Remove adjusting screw (22), spring (25), and
check ball (26). Take care when removing the
adjusting
screw.
Spring
(25)
is
under
pressure.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using.
Avoid contact with eyes. If solvent
contacts eyes, flush eyes with water and
get immediate medical attention.
NOTE
Valve seat may require heat to remove.
Heat
valve
seat
with
a
gasoline
blowtorch if necessary.
f.
Use a culture swab soaked with thread locking
compound solvent to loosen valve seat (27)
from valve body (28).
GO TO NEXT PAGE
2-521
