TM 5-3895-373-34
2.34
REPLACE TRACK FRAME - Continued.
NOTE
There are two track frames. The
procedure is the same for both the left
and right sides. The right t# side is
shown in this procedure.
A.
REMOVE.
1.
REMOVE TRACK FRAME FROM MAIN FRAME.
a.
Place cribbing beneath track frame (1).
b.
Place transmission jack beneath center of track
frame (1). Raise transmission jack against track
frame to keep frame from dropping onto
cribbing.
c.
Remove
hex
head
cap
screws
(2)
and
lockwashers (3) from main frame (4). Track
frame offset wrench may be used. Discard
lockwashers.
2.
USE TRANSMISSION JACK TO MOVE TRACK
FRAME CLEAR OF MAIN FRAME.
a.
With
the
help
of
another
person,
pull
transmission jack and track frame (1) away from
main frame (4).
b.
Set track frame (1) down on cribbing.
c.
Remove transmission jack from beneath track
frame (I).
GO TO NEXT PAGE
2-496
