TM 5-3895-373-34
2.33
REPLACE/REPAIR SPEED REDUCTION GEARBOX - Continued.
F.
INSTALL Continued.
e.
When speed reduction gearbox (8) is fully mated
with track drive hub (9), instruct another person
move lifting device from under paving machine.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
f.
Apply thread locking compound
(Item
13,
Appendix B) to threads of socket head cap
screws (7). Install cap screws. Using hex head
driver (Item 88, Appendix D), evenly tighten cap
screws to 45 lb-ft (61 N•m).
4.
INSTALL HYDRAULIC LINE.
a. Remove protective caps from fitting of tube (1)
and straight adapter (2).
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
skin
contact.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention.
b. Apply hydraulic fitting sealant to exposed threads
of straight adapter (2).
Be careful not to overtighten fitting of
tube (1) on straight adapter (2).
Overtightening will cause stripping of
brass screw threads or shearing off of
adapter.
c.
Install and tighten fitting of tube (1) on straight
adapter(2). Use backup wrench across adapter flats and
do not overtighten tube fitting.
NOTE
FOLLOW-ON-TASK: Install propulsion motor per paragraph 2.32.
END OF TASK
2-494
