TM 5-3895-373-34
2.26
REPAIR CONTROL HANDLE.
This task covers:
a.
l Disassemble
b.
Clean
c.
Assemble
INITIAL SETUP
Tools:
References:
General mechanic’s automotive tool kit
TM 5-3895-373-20
(Item 106, Appendix D)
TM 5-3895-373-24P
Six-point screwdriver set (Item 79, Appendix D)
Equipment Condition:
Materials/Parts:
Control handle removed per TM 5-3895-373-20.
Cleaning cloth (Item 6, Appendix B)
Cleaning solvent (Item 31, Appendix B)
Lint-free cloth (Item 7, Appendix B)
Sealing compound (Item 29, Appendix B)
Thread locking compound solvent (Item 32, Appendix B)
Boot
Case fasteners
Case gasket
A.
DISASSEMBLE.
1.
LOOSEN STRAIN RELIEF CONNECTOR, AND
SEPARATE
CASE,
AND
CASE
GASKET
FROM
CONTROL HANDLE.
a.
Loosen strain relief connector (1).
b.
Use a pair of pliers and a flat blade screwdriver
to remove case fasteners (2). Discard case
fasteners.
c.
Pull case (3) from control handle (4) far enough
to allow access to case gasket (5).
d.
Remove case gasket (5). Discard case gasket.
GO TO NEXT PAGE
2-353
