TM 5-3895-373-34
2.26
REPAIR CONTROL HANDLE. - Continued
A.
DISASSEMBLE Continued.
2.
REMOVE KNOB, HANDLE, CENTER LOCK
SPRING,
AND
CENTER
LOCK
HANDLE
FROM
CONTROL HANDLE.
a.
Grasp knob (6) and control handle (7) firmly.
NOTE
Handle (10) may either remain inside
control handle (7) or may remain in
knob (6) when knob is turned and
removed.
b.
Turn knob (6) counterclockwise and remove.
c.
Remove center lock spring (8).
d.
Remove center lock handle (9).
NOTE
Do not remove handle (10) from
control handle (7) unless it needs to
be replaced.
e.
If handle (10) remains in control handle (7), use
vise grip pliers to remove handle.
f.
If handle (10) remains in knob (6), replace both
handle and knob, if required.
3.
REMOVE RETAINING PLATE AND BOOT
FROM CONTROL HANDLE.
a.
Use a screwdriver from six-point screwdriver set
to remove pan head cap screws (11).
b.
Remove collar seals (12).
c.
Remove retaining plate (13).
d.
Remove boot (14). Discard boot.
GO TO NEXT PAGE
2-354
