TM 5-3895-373-34
2.22.
REPLACE/REPAIR FUEL TANK.
B.
CLEAN - Continued.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding
and
personal
protective
equipment (goggles/face shield and
gloves). Failure to take proper
precautions may result in severe
injury or loss of vision.
e.
Use 30 psi (207 kPa) maximum compressed
air to dry fuel tank interior. Tilt fuel tank to
drain moisture through drain plug opening.
Blow compressed air through fuel suction hose
openings, fuel level transmitter opening, and
fuel filler opening.
2.
CLEAN FASTENER THREADS.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using.
Avoid contact with eyes. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
a.
Clean all cap screws with thread locking
compound solvent.
b.
Dry cap screws with cleaning cloths.
c.
Wipe excess pipe sealant from tank drain plug
and fittings using cleaning cloth.
GO TO NEXT PAGE
2-312
