TM 5-3895-373-34
D.
ASSEMBLE - Continued.
3.
INSTALL WHEEL HOUSING AND IMPELLER
HOUSING ONTO COMPRESSOR HOUSING.
a.
Position
impeller
housing
(8)
against
compressor housing (4) as shown.
Anti-seize compound can cause eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Coat threads of bolts (6) with anti-seize
compound.
c.
Install bolts (6) through plates (5) and clamps
(7) and into impeller housing (8). Securely
tighten bolts (6).
d.
Use a flat-blade screwdriver to bend edges of
clamps up to secure bolts.
e.
Position wheel housing (3) against compressor
housing (4) as shown.
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
f.
Install clamp (2) on bolt (1). Apply thread
locking compound to threads of bolts (1).
g.
Install and securely tighten bolts (1) through
clamps (2) and into wheel housing (3).
NOTE
FOLLOW-ON-TASK: Install turbosupercharger per TM 5-3895-373-20.
END OF TASK
2-305
