TM 5-3895-373-34
2.21
REPAIR TURBOSUPERCHARGER - Continued.
B.
CLEAN.
Cleaning solvent, P-D-680, is TOXIC
and
flammable.
Wear
protective
goggles and gloves. Use only in a well
ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame.
Never smoke when using solvent; the
flashpoint for Type III cleaning solvent is
200°F (93,3°C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
1.
RINSE ALL PARTS IN CLEANING SOLVENT.
USE A CLEANING BRUSH TO REMOVE DIRT
PARTICLES AND VARNISH DEPOSITS FROM
HOUSINGS,
IMPELLER
SHAFT,
AND
COMPRESSOR WHEEL.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
guarding
and
personal
protective
equipment (goggles/face shield and
glove).
Failure
to
take
proper
precautions may result in severe
injury or loss of vision.
2.
USE
30
PSI
(207
kPa)
MAXIMUM
COMPRESSED
AIR
TO
REMOVE
ANY
FOREIGN
MATTER
FROM
HOUSINGS,
IMPELLER
SHAFT,
AND
COMPRESSOR
WHEEL. DRY ALL PARTS WITH A LINT-
FREE CLOTH.
GO TO NEXT PAGE
2-300
