TM 5-3895-373-34
A.
DISASSEMBLE - Continued.
3.
REMOVE
IMPELLER
SHAFT,
BEARINGS,
AND
SHROUD
FROM
COMPRESSOR
HOUSING.
a.
Tap impeller shaft (9) lightly with a plastic
hammer.
b.
Remove impeller shaft (9) and shroud (18).
c.
Remove compressor housing (4) from
bench vise.
d.
Remove ring (19). Discard ring.
Use care when removing or installing
snap and retaining rings. Snap and
retaining
rings
are
under
spring
tension and can act as projectiles
when
released
and
could
cause
severe eye injury.
e.
Use snap ring pliers and remove retaining
rings (20). Discard retaining rings.
f.
Remove bearings (21). Discard bearings.
g.
Remove retaining rings (22). Discard
retaining rings.
GO TO NEXT PAGE
2-299
