TM 5-3895-373-34
2.19
REPLACE/REPAIR FUEL INJECTION PUMP - Continued.
E.
ASSEMBLE - Continued.
14.
ASSEMBLE AND INSTALL SPRING LINK,
METERING VALVE, AND GOVERNOR ARM
ASSEMBLY.
a.
Assemble governor arm assembly (58) to
spring link (60) and attach spring (61) to
tabs on governor arm assembly and spring
link.
b.
Manually compress spring link (60) spring
and install metering valve (59) onto hooked
end of spring link (60).
c.
As an assembly, install spring link (60),
metering valve (59), and governor arm
assembly (58) onto fuel injection pump.
Install bottom of spring link (60) into fuel
injection pump, to rest on flat part of thrust
washer bearing (144) on drive shaft (137).
d.
Insert shaft end of metering valve (59) into
bore on rotor head assembly (111).
GO TO NEXT PAGE
2-280
