TM 5-3895-373-34
2.19
REPLACE/REPAIR FUEL INJECTION PUMP - Continued.
E.
ASSEMBLE - Continued.
11.
INSTALL TRANSFER PUMP LINER, FUEL
PUMP BLADES, AND SANDWICH PLATE.
a.
Lubricate gasket (103) with clean calibrating
oil.
b.
Install gasket (103) and transfer pump liner
(102). Position transfer pump liner notch at
the 3 o’clock position.
c.
Install fuel pump blades (101).
d.
Install sandwich plate (100), with notch in
sandwich plate
aligned
with
notch
in
transfer pump liner (102).
12.
ASSEMBLE SPRING, PUMP PISTONS, FUEL
PUMP GUIDE, FUEL ADJUSTER, FILTER
ELEMENT, SPRING, AND BOSS COUPLING.
a.
Install spring (98) into end plate (99).
b.
Install spring (97), pump piston (95), and
flat washer (96) into small end of pump
piston (93).
c.
Install fuel pump guide (94) into large end of
pump piston (93) and install assembled
pump piston into end plate (99).
d.
Install filter element (91), fuel adjuster (92),
and spring (90).
e.
Install washer (89) and boss coupling (88)
onto assembled end plate (99). Tighten
boss coupling hand tight.
GO TO NEXT PAGE
2-278
