TM 5-3895-373-34
2.19
REPLACE/REPAIR FUEL INJECTION PUMP - Continued.
B.
DISASSEMBLE Continued.
7.
REMOVE BOSS COUPLING, SPRING, FILTER
ELEMENT, FUEL ADJUSTER, PUMP PISTONS,
FUEL PUMP GUIDE, AND SPRING.
a.
Remove boss coupling (88) and washer (89).
b.
Remove spring (90), filter element (91), and fuel
adjuster (92).
c.
Remove pump piston (93), fuel pump guide (94),
pump piston (95), flat washer (96), and springs
(97 and 98) from end plate (99).
8.
REMOVE
SANDWICH
PLATE,
FUEL
PUMP
BLADES, AND TRANSFER PUMP LINER.
a.
Remove sandwich plate (100).
b.
Remove fuel pump blades (101).
c.
Write down position of transfer pump liner (102)
in fuel injection pump by indicating position of
notch in relation to open end of pump. For
example, 3 o’clock, etc.
d.
Remove gasket (103) and transfer pump liner
(102).
GO TO NEXT PAGE
2-256
