TM 5-3895-373-34
E.
INSTALL - Continued.
Uncured gasket sealing compound
can
cause
eye
damage
or
skin
irritation. Avoid contact with eyes
and skin. If compound contacts eyes,
flush eyes with water for 15 minutes
and get immediate medical attention.
If sealing compound contacts skin,
remove from skin with a dry cloth or
paper towel and wash thoroughly
with
soap
and
water.
Sealing
compound releases acetic acid while
curing.
Use
with
adequate
ventilation.
c.
Apply a thin coating of gasket sealing compound
to both sides of gasket (44).
NOTE
When installing a new gasket, it may
be necessary to trim gasket legs to
ensure a flush fit with oil sump
gasket.
d.
Install gasket (44) and timing gear housing (43)
onto engine block.
e.
Install lockwashers (42) and bolts (41).
f.
Install lockwashers (40) and bolts (39).
g.
Install idler gear hub (142) onto engine block.
GO TO NEXT PAGE
2-229
