TM 5-3895-373-34
E.
INSTALL Continued.
t.
Press in timing gear housing seal until
front of seal is 0.43 to 0.45 in. (10, 92 to
11, 43 mm) below front face of timing
gear cover.
u.
Install centering tool onto crankshaft
assembly (136) with bolts (1).
Uncured gasket sealing compound
can
cause
eye
damage
or
skin
irritation. Avoid contact with eyes and
skin. If compound contacts eyes,
flush eyes with water for 15 minutes
and get immediate medical attention.
If sealing compound contacts skin,
remove from skin with a dry cloth or
paper towel and wash thoroughly with
soap and water. Sealing compound
releases acetic acid while curing. Use
with adequate ventilation.
v.
Apply a thin coating of gasket sealing
compound to both sides of gasket (27).
w.
Install gasket (27) and timing gear cover
(26), and secure with lockwashers (25)
and screws (22), lockwashers (25) and
screws (23), and lockwasher (21) and
bolts (20).
x.
Install
lockwasher
(25)
and
straight
headed pin (24).
y.
Remove bolt (I) and centering tool.
GO TO NEXT PAGE
2-233
