2.17
DIESEL ENGINE REPAIR - Continued.
E.
INSTALL - Continued.
g.
Install dipstick tube (51) by threading dipstick
bushing (50) into oil sump. Orient dipstick tube
to point away from engine block.
h.
Install dipstick (49).
Be careful not to damage preformed
packing when sliding over threads.
Sharp edges of thread can cut or
damage
preformed
packing.
Damaged
preformed
packing
will
cause
leakage
and
affect
performance.
i.
Install preformed packing (53) onto drain line
straight adapter (52) and install adapter.
11.
INSTALL TIMING GEAR HOUSING, IDLER GEAR
HUB,
IDLER
GEAR,
CAMSHAFT
GEAR,
FUEL
INJECTION PUMP GEAR, TIMING GEAR COVER
SEAL, TIMING GEAR COVER, AND CRANKSHAFT
PULLEY ONTO ENGINE.
Uncured gasket sealing compound
can
cause
eye
damage
or
skin
irritation. Avoid contact with eyes
and skin. If compound contacts eyes,
flush eyes with water for 15 minutes
and get immediate medical attention.
If sealing compound contacts skin,
remove from skin with a dry cloth or
paper towel and wash thoroughly
with
soap
and
water.
Sealing
compound releases acetic acid while
curing.
Use
with
adequate
ventilation.
a.
Apply a thin coating of gasket sealing compound
to both sides of gasket (48).
b.
Install
gasket
(48),
blanking
plate
(47),
lockwashers (46), and hex head cap screws
(45) onto timing gear housing (43).
GO TO NEXT PAGE
2-228
