TM 5-3895-373-34
B.
CLEAN Continued.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93, 3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
2.
WIPE OFF DIRT, GREASE AND OIL RESIDUE
FROM
PUMP
DRIVE
GEARBOX
WITH
A
CLEANING CLOTH MOISTENED IN CLEANING
SOLVENT. IF NECESSARY USE A PUTTY KNIFE
TO CLEAN OFF COVER PLATE WHERE PUMP
DRIVE GEARBOX ATTACHES TO FLYWHEEL
HOUSING.
3.
CLEAN DIRT, GREASE AND OIL RESIDUE FROM
FRONT
ENGINE
MOUNTING
BRACKETS,
FLYWHEEL MOUNTING BRACKETS AND PUMP
DRIVE GEARBOX SUPPORT BRACKETS WITH A
CLEANING CLOTH MOISTENED IN CLEANING
SOLVENT.
4.
CLEAN
GREASE
AND
FOREIGN
MATERIAL
FROM DRIVE SHAFT AND DRIVE PLATE WITH A
CLEANING CLOTH MOISTENED IN CLEANING
SOLVENT.
GO TO NEXT PAGE
2-113
