TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
B.
CLEAN Continued.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
5.
CLEAN THREADS OF HEX HEAD CAP SCREWS
WITH THREAD LOCKING COMPOUND
SOLVENT. WIPE DRY WITH A CLEANING
CLOTH.
C.
INSTALL.
NOTE
During installation secure cables,
wires and hoses with tie wraps where
necessary to
avoid
contact
with
chaffing
surfaces,
moving
parts,
heated
components
and
hot
manifolds
inside
engine
compartment.
1.
INSTALL
FLYWHEEL
HOUSING
MOUNTING
BRACKETS, OIL DRAIN HOSE, AND FRONT
ENGINE MOUNTING BRACKETS ONTO ENGINE.
a.
Install four lockwashers (232) onto four hex head
cap screws (231).
Thread locking compound can cause
eye
damage.
Wear
safety
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
b.
Coat threads of hex head cap screws (231) with
thread locking compound.
c.
Install hex head cap screws (231) and right
flywheel mounting bracket (194) onto right side
of engine (221).
d.
Tighten hex head cap screws (231) 95 Ib-ft (122
N•m).
GO TO NEXT PAGE
2-114
