TM 5-3895-373-34
A.
REMOVE Continued.
40. REMOVE
FRONT
ENGINE
MOUNTING
BRACKETS, OIL DRAIN HOSE, AND FLYWHEEL
HOUSING
MOUNTING
BRACKETS
FROM
ENGINE.
Ensure
hex
head
cap
screws
removed
from
engine
mounting
brackets are tagged for reassembly.
If hex head cap screws of incorrect
length
are
used
for
reassembly,
serious engine damage may occur.
a.
Tag and remove hex head cap screws (222),
lockwashers
(223),
and
engine
mounting
brackets (195) on left and right sides of engine.
Discard lockwashers.
b.
Remove engine oil drain hose (116) and plug oil
sump straight adapter (224).
c.
Remove engine oil pressure transmitter hose
(225) from engine oil pressure transmitter (226).
d.
Disconnect fuel differential pressure switch hose
(227) from fuel differential pressure switch (228).
e.
Disconnect fuel hose (229) connected to engine
fuel filter outlet (230). Disconnect other end of
fuel hose from fuel differential pressure switch
(228).
f.
On the left side of engine (221), remove hex
head cap screws (231), lockwashers (232),
engine oil pressure transmitter and bracket
(226), fuel differential pressure switch (228) and
bracket
(233),
and
left
flywheel
housing
mounting bracket (194). Discard lockwashers.
g.
On the right side of the engine, remove hex head
cap screws (231), lockwashers (232), and right
flywheel
housing
mounting
bracket
(194).
Discard lockwashers.
GO TO NEXT PAGE
2-111
