TM 5-3895-373-34
A.
REMOVE - Continued.
7.
REMOVE KNURLED NUT (48) AND WIRE 104
(49)
FROM
ENGINE
OIL
PRESSURE
TRANSMITTER (50). INSTALL KNURLED NUT
BACK ONTO OIL PRESSURE TRANSMITTER.
TAG WIRE.
8.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR
(51)
FROM
FUEL
DIFFERENTIAL
PRESSURE
SWITCH
CONNECTOR (52).
9.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR (53) FROM FUEL PRESSURE
TRANSMITTER CONNECTOR (54).
10.
REMOVE HEX HEAD CAP SCREWS (55),
LOCKWASHERS (56), AND CLAMPS (57)
SECURING POSITIVE BATTERY CABLE (14)
AND SLAVE CABLE (13) TO FLYWHEEL
HOUSING (58). DISCARD LOCKWASHERS.
INSTALL HEX HEAD CAP SCREWS BACK
INTO FLYWHEEL HOUSING.
11.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR
(59)
FROM
TACHOMETER
GENERATOR CONNECTOR (60).
GO TO NEXT PAGE
2-87
