TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
A.
REMOVE - Continued.
5.
DISCONNECT ELECTRICAL CONNECTIONS
FROM THERMOSTAT HOUSING.
a.
Remove self-locking screws (34) from high
temperature shutdown sensor (35)Discard self-
locking screws.
b.
Tag and remove wire 111 (36) from C terminal,
wire 152 (37) from NO terminal, and wire 151
(38) from NC terminal of high temperature
shutdown sensor (35).
c.
Remove knurled nut (39) and wire 105 (40) from
coolant temperature sensor (41). Install knurled
nut back onto sensor terminal. Tag wire.
d.
Tag and disconnect harness connector (42) from
engine
coolant
temperature
transducer
connector (43).
6.
TAG AND DISCONNECT WIRE G201 (44) AND
WIRE
322
(45)
FROM
FUEL
SHUTOFF
SOLENOID (46) ON FUEL INJECTION PUMP
(47).
GO TO NEXT PAGE
2-86
