TM 5-3895-373-34
2.16
ENGINE REPLACEMENT - Continued.
A.
REMOVE - Continued.
18.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR (74) FROM ENGINE OIL FILTER
DIFFERENTIAL PRESSURE TRANSMITTER
CONNECTOR (75).
19.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR
(76)
FROM
ENGINE
OIL
PRESSURE
TRANSMITTER
CONNECTOR
(77).
20.
TAG
AND
DISCONNECT
HARNESS
CONNECTOR
(78)
FROM
THROTTLE
ACTUATOR CONNECTOR (79).
21.
REMOVE
GROUND
WIRE
G201
FROM
HYDRAULIC
RESERVOIR
MOUNTING
BRACKET.
a.
Remove hex head cap screw (80), lockwasher
(81), wire G201 (82), and flat washer (83).
Discard lockwasher. Tag wire.
b.
Install hex head cap screw (80) and flat washer
(83) back into hydraulic reservoir mounting
bracket (84).
GO TO NEXT PAGE
2-90
